Maizic YCC365 Installation

How To Download APP

  •  Search “YCC365 Plus”in Apple Store or Android app store and download.
  • Scan the QR code and download.

How to Connect Camera Add Device

Register an account

  • When you use this app at the first time, you need to use your email to register an account, click”Sign Up”and set a password according this procedure,or choose Long in with mobile phone mumber.
  •  If you forget your password, you can reset your password, just click “Forgot password” on the login page.
  •  Password should be at least 6 characters and not longer than 26 characters,It should be a combination of letters and numbers.Register an account

Only support mobile phone number registration in some regions. Please use email to register in other areas.

Connect the camera

Note: Camera only supports 2.4G WIFI before adding devices, make sure your router is 2.4G

WIFI, and your phone is connected to 2.4G Wi-Fi.

Scan code to add

  • Please make your phone connect to the Wi-Fi.
  •  Select your own 2.4GWi-Fi and enter your password.(5G network is not supported).
  • Scan the camera lens toward the QR code of the phone,(Align the QR code with camera lens at a distance of 10-20cm)Hear a voice prompt,Click”When you hear a beep or a green linght”after hearing the beep, Keep the camera cas close as possible to the router, The connection process takes about 1-2minutes,after you will hear welcome to use camera.Scan code to add

Addition by connection to network cable (Only support Lan port device)

  • Click the button in the upper right comer on the app homepage.
  • Choose the device type intelligent camera,choose the addition by connecting to network cable.
  • Plug in the power to the camera,Device network port is connected to the network cable Scan device body QR code,put the QR code on the device body into the box and scan it.
  • Please wait patiently ,The connection process takes about 1-2minutes,after you will hear welcome to use camera.Addition by connection to network cable (Only support Lan port device)

Addition of AP hotspot

  • Click the button in the upper right comer on the app homepage.
  • Choose the Addition of AP hotspot,Plug in the power to the camera,Wait patienty for the device light to blink or hear a tone,Click Next when done.
  • If you don’t see any tips,try resetting your device,Find the reset button,Long press for at least 5s,click next after prompted.
  • please go to the Wi-Fi list and connect the Wi-Fi in the blue field “CLOUDCAM_XXXX” Select the Wi-Fi that matches the prefix and connect Return to APP after successful connection.
  • After connecting the device successfully click next,Choose your router Wi-Fi,Enter Wi-Fi password,Click confirm,Addition is successful,then your can preview the screen.Addition of AP hotspot

AP Direct mode (special)

  • Open the YCC365plus app to enter the login interface, click “Local login” .
  • Click the button in the upper right “+” on the app homepage.
  • Click “AP networked device preview” and Click “Next” .
  • Go to Setting Network click your phone connect to “CLOUDCAM_XXXX” network.
  • Network setting set the Wi-Fi has been connected with this device and Click “Next” .
  • Enter user Name: admin Password: 12345 Click “Next”, then your can preview the screen.AP Direct mode (special)